Loading ...
Loading ...
Loading ...
Step 21. Pinch belt together so that it is not in the
pulley groove, and the lower pulley can be
pushed towards the engine.
Lower Pulley
Ha]f 0 0
_ _ _ Guard
_'_" Pin
Step 24. Replace[arge baffle.
Step 25. Replace small baffle and three hex head
screws holding d in place.
Step 26. Replace blade adapter and blade. See
the Blade Removal, Sharpening and
Replacement Section for proper
assembly.
Small affle
S.
Hex H
Step 22. Pivol the control arm back to its original
position and reilqstal! the six-speed cable into the
slot.
Step 23. Check and make sure the bal_is routed
inside the pulley halves alld the belt guard pin.
Step 27.
Step 28.
Step 2g.
Step 30.
Replace the eight phillips head screws
that hold the large baffle in place.
Replace the rear wheels, rear wheel
gears and hub caps. The gears need to
be put on in the right way for the self
propelled mechanism to work. Check
the Installation of the gear by spinning
the wheel. It should spin freely in one
direction but not the other. If the wheel
spins freely In both directions, flip the
gear over.
Tip mower back onto its wheels
Go through the neutral adjustment test
in Section 7 - OPERATION.
23
Loading ...
Loading ...
Loading ...