Loading ...
Loading ...
Loading ...
SECTION 6: CONTROLS
Blade Conlrol HaNdl+__
Recoil Starter , , _ five Clutch Control
(If Equipped) "'
Throttle Control
All Models Models 380 - 389
Figure 5
BLADECONTROLHANDLE
The blade control handle is located on the upper handle of the mower, See Figure 5. The blade control
handle must he depressed in order to 8tart _nd operate the unit. Release the blade control handle to stop the
engine and blade.
WARNING; The blade control handle is a salety device. Never attempt to byp_.ss its operations.
The blade will he rotaling whenever the engine is running,
OPTIONAL THROTTLE CONTROL
Your unit may be equipped with 1 of 3 throttle controls. Follow instructions which pertains to your unit.
• The throttle control is located on the left side of tile upper handle. It is used to regul&te the engine
speed.
• The throttle control is located on the engine, it [s used to regulate the engine speed.
• Your engine Is equipped wgh a constant speed thretlle, which is set at full throttle for best performance.
WARNING; The throttle control cannot be used to stop the engine If your throttle control is
located on the engine, do not adjust the throftle control with the engine running.
RECOIL STARTER
The recoil starter handle Is attached to the upper handle. See Figure 5. Stand behind the unit In the operating
position to start the unit.
DRIVE CLUTCH CONTROL
Squeezing the drive clutch control engages the ddve eystem. Releasing the clutch control disengages the
drive system Release the clutch control to slow down when negotiating an obstacle, making a turn or
stopping.
SHIFT LEVER (Models 380 - 389)
The shift lever is located on the drive clutch control housing an the upper handle. See Figure 5. This lever is
used to select the ferwald speed of the mower, When changing your speed selection, release the drive
clulch control.
10
Loading ...
Loading ...
Loading ...