Loading ...
Loading ...
Loading ...
SIDE DISCHARGING GRASS CLIPPINGS (Optional)
F -- --_ ............ _:i'_p-l__" Lift r_aarflap, remove grass bag, or
iSide Discharge Top and Left V=ew.
This side up
mulch plug if installed,. Hang side
discharge chute.
Hang
SECTION 8: ADJUSTMENTS
WARNING; Do not at any time make any adjustment to lawn mower without first stopping engine
and disconnecting spark plug wire,
HANDLE HEIGHT ADJUSTMENT
r
Lower Handle _ Notch
FIgiJre 7
Your mower is shipped with the handle in the higher height position. TO lower the har_dle height, proceed as
follows.
, Remove the starter rope from the rop_ guide.
= Remove the upper handle by removing Ihe hand knobs end carriage bolts. Lay the upper handle out of
tile way, being careful not to bend or kink the cables.
• Remove Ihe hairpin clips from the weld pins on the handle brackets. Press out on thB legs of the lower
handle Remove lower handle from the mower.
• Turn the lower handle aroL_ad so the notch on the bottom of the lower handle is facing forward as
shown in Figure 7. Reassemble, placing [he bottom holes in the handle over the weld pins in the
handle mouniing bracket,
• Reassemble the upper handle to the lower handle.
• Place the hairpin clips in the inner holes in the weld pins and attach the starter rope as instructed in the
Set Up Instructions.
14
Loading ...
Loading ...
Loading ...