370 THRU 389 MTD gas walk behind lawnmower

User Manual - Page 22

For 370.

PDF File Manual, 32 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Step 13. squeeze the 5elt togeiliei a_d-push belt ..... St_,p 1g--Pivot tb_control arm down away from the
fon_vard Press the control arm inward towards
the deck and remove the six speed cable from
the slot
Six-Speed
Cable Slot Belt
COlltroJ
Step 14, Place the new belt over the Iransmission
pullBy. Start the belt in pulley groove and rotate
pulley until belt is seated in transmission puiley.
Step 15. Place beg between Idler pulley and the belt
keeper bracket.
Step 16, Using pliers, rotate the belt keeper bracket
so that it snaps into slut eL7the idler bracket.
Step 17. Tighten the Idler pulley bolt and Ioeknut
using two 7/16" wrenches.
Transmlss{on
Pulley
Belt_
Beg Keeper
Bracket
Idler Pulle_,
Bracket
Transmission
Bert =
Locknut
pulley and belt,
Control
Arm
Step 19. Lift off the lower pulley assembly and
remove the old belt from around the crankshaft.
Lower Pultey
e o
Crankshaft
Step 20, Place belt between the two pulley halves on
the crankshaft, Make sure to route the belt
inside the belt guard pin.
O o
Upper
Pulley_
Hatf
Tab_.._
Belt
Belt
Pulley
Pin Half
IMPORTANT: When changing the belt, do not disassemble
the lower pulley assembly.
22
Loading ...
Loading ...
Loading ...