Loading ...
Loading ...
Loading ...
a)Ambient temp sensor breakdown Display E1 in digital window.
b)The machine not make ice or the gas leak Display E2 in digital window
c)Magnetic control switch cutoff----“ Full” light will be on when plugging on or
just turning on the unit. And it will delete the breakdown display if this switch
is electric shorted.
d)During the ice making process, press the “ON/OFF” button for more than
5 seconds, the unit starts to enter the ice harvest program. And after the ice
harvest program,it continues to enter the ice making process.
This marking indicates that this product should not be
disposed with other household wastes.
To prevent possible harm to the environment or
human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable
reuse of material resources. To return your used
device, please use the return and collection systems.
They can take this product for environmentally safe
recycling.
ERROR INDICATOR
CORRECT DISPOSAL OF THIS PRODUCT
Ice cube shape
is irregular
Ice cube is very
thin
Clean the water tank, and
change with new
water.
Clean the water dividing
pipe，make sure all nine
holes are unclogged
Water quality is not good or
the water tank is very dirty
The little holes on the water
dividing pipe is some
blocked
Move the unit to low
temperature space, or
lengthen the time of each
ice making cycle.
Make sure there is more
than 20cm/8 inch space
between the unit back &
front and the obstacle
Ambient temperature is too
high
Ice cube is too
thick
Reduce the time of each ice
making cycle.
Ambient temperature is too
low
“ ”
indicator is on
Take out some ice cubeThe ice storage bin is full of
the ice cube.
Ice making
cycle is normal,
but there is no
ice cube
produced
Move to the place with
temperature lower
than 90 Fahrenheit,
and change to the low
temperature water
The temperature of
Ambient, or water in water
tank is too high
Need the technical
serviceman to maintain
Refrigerant leakage
Need the technical service
person to maintain
Cooling system tube is
clogged
Air circulation around the
unit is not good
Problem Possible Cause Solution
NORMAL TROUBLE SHOOTING ERROR INDICATOR
CORRECT DISPOSAL OF THIS PRODUCT
30 31
Loading ...
Loading ...
Loading ...