Loading ...
Loading ...
Loading ...
What shouldn't be done
Never keep anything in the ice storage bin that is not ice: objects like wine and beer
bottles are unsanitary, and also its labels may slip off and obstruct the drain pipe.
Exterior Cleaning
The ice storage bin should be sanitized occasionally. Clean the bin before the ice
maker is used for the first time and reused after stopping for an extended period of
time. It is usually convenient to sanitize the bin after the ice making system has been
cleaned, and the storage bin is empty.
1.Disconnect power to the unit.
2.Open the door and with a clean cloth, wipe down the interior with a sanitizing
solution made of 28g/1 ounce of household bleach or chlorine and 7.5L/1.6 gallon of
hot water(95
O
F to 115
O
F) .
3.Rinse thoroughly with clear water. The waste water will be drained out through the
drain pipe.
4.Reconnect power to the unit.
The ice scoop should be washed regularly. Wash it just like any other food container.
The door and cabinet may be cleaned with a mild detergent and warm water solution
such as 28g/1 ounce of dish washing liquid mixed with 7.5L/1.6 gallon of warm water.
Do not use solvent-based or abrasive cleaners. Use a soft sponge and rinse with clean
water. Wipe with a soft clean towel to prevent water spotting.
Stainless steel models can discolor when exposed to chlorine gas and should be
cleaned. Clean stainless steel models with a mild detergent and warm water solution
and a damp cloth. Never use abrasive cleaning agents.
WARNING
DO NOT use solvent cleaning agents or abrasives on the interior.
These cleaners may transmit odour to the ice cubes,or damage or
discolor the interior.
NOTICE: Stainless steel models exposed to chlorine gas and moisture, such as in
areas with spas or swimming pools, may have some discoloration of stainless steel.
Discoloration from chlorine gas is normal.
Interior Cleaning
For Ice Storage Bin
Ice Making Parts Cleaning
During the using, periodically to clean these main system of your ice-maker.
Little holes of water dividing
pipe
water dividing pipe
Evaporator
Pull up first
Then move out right
toward
1. Repeat above step to clean the water tank and other inner parts of the unit.
2. Especially, to the water dividing pipe on the evaporator, when the compressor
and the water pump run normally, but if there is no water flowing out from the water
dividing pipe or the water flowing is very small, please discharge this water dividing
pipe to clean carefully. Clean each little holes on the water dividing pipe displayed in
the following illustration, make sure each hole is not clogged by something, then
install back to the original location.
3. When there are ice cubes on the surface of the evaporator, but can’t fall down
easily, do not use the mechanical substance to remove it by force; Only press the
“ON/OFF” button for more than 5 seconds, the unit will enter the ice melting
process, after some while, the big ice-cubes will fall down, then turn off the unit and
unplug the power cord to clean the surface of the evaporator.
24 25
Loading ...
Loading ...
Loading ...