Loading ...
Loading ...
Loading ...
5
NOTE:
It is most important that this Electric Static / Convection Oven Range is installed correctly
and that operation is correct before use. Installation shall comply with local electrical and
health and safety requirements.
This appliance shall be installed with sufficient ventilation to prevent occurrence of
unacceptable concentrations of health harmful substances in the room, appliance is
installed in.
Blue Seal Electric Static / Convection Oven Ranges are designed to provide years of satisfactory service,
and correct installation is essential to achieve the best performance, efficiency and trouble-free operation.
This appliance must be installed in accordance with National Installation Codes and in addition, in
accordance with relevant National / Local codes covering electrical and fire safety.
Australia / New Zealand: - AS / NZS3000 - Wiring Rules.
United Kingdom: - BS 7671 - Requirements for Electrical Installations.
Installations must be carried out by authorised persons only. Failure to install equipment to
relevant codes and manufacturer’s specifications shown in this section will void the warranty.
1. Remove all packaging and transit protection from appliance including all protective plastic coating
from exterior stainless steel panels.
2. Check equipment and parts for damage. Report any damage immediately to carrier and distributor.
3. Report any deficiencies to distributor who supplied appliance.
4. Check available electrical supply is correct to as shown on lower right hand front sill panel.
1. Installation must include adequate clearance and ventilation.
2. Position appliance in its approximate working position.
3. Legs must always be fitted to base of appliance.
NOTE: Only non-combustible materials can be used in close proximity to this appliance.
All Models
All models come pre-assembled.
NOTE: This appliance is fitted with adjustable feet to enable unit to be positioned securely and
level. This should be carried out on completion of electrical connection. Refer to ‘Electrical
Connection’ section.
Optional Accessories (Refer to Replacement Parts List)
Plinth Kit. For installation details, refer to the instructions supplied with each kit.
Left / Right hand side 250mm 0mm
Rear 50mm 0mm
Loading ...
Loading ...
Loading ...