Loading ...
Loading ...
Loading ...
3
E506D Electric Static Oven Range with 6 Radiant Elements.
E506C Electric Static Oven Range with 4 Radiant Elements / 300mm Griddle.
E506B Electric Static Oven Range with 2 Radiant Elements / 600mm Griddle.
E506A Electric Static Oven Range with 900mm Griddle.
E56D Electric Convection Oven Range with 6 Radiant Elements.
E56C Electric Convection Oven Range with 4 Radiant Elements / 300mm Griddle.
E56B Electric Convection Oven Range with 2 Radiant Elements / 600mm Griddle.
E56A Electric Convection Oven Range with 900mm Griddle.
A commercial heavy duty, 900mm wide Electric Oven Range designed for modular kitchens and is
constructed in an easy clean stainless steel external finish.
The range is fitted with either a 900mm 6.5kW electric static oven or convection oven.
The hob is divided into modular sections of griddle plates and radiant elements (solid or open).
Electrical supply connection point is located at rear of appliance, approximately 74mm from right
hand side, 501mm from rear and 150mm from floor.
When connecting a this electric appliance to mains supply, ensure that the following is carried out:-
An isolating switch is fitted within 2m of appliance, but not on appliance and in such a
position that user does not have to reach across cooking surface.
Supply cord shall be oil-resistant, sheathed flexible cable and not lighter than ordinary
polychloroprene or other equivalent synthetic elastomer sheathed cord (as per AS / NZS
3191 part 2.10.11. or IEC 60245-IEC-57) e.g. HO5 RN-F Type.
Branch supply line shall be individually overload protected to correct current rating and
supply chord shall be protected against any mechanical or thermal damage.
A grommet is fitted around wiring entry hole into appliance.
All wiring connections must be tight.
Refer to appropriate wiring standards for size of cable that is to be supplied to an appliance for
current drawn on that line.
Model
Total Power
Input
Amps @ 400 - 415 Vac
Motor
Power Supply
Voltage Type Frequency
L1 L2 L3
E506D 400-415 Vac 3 P+N+E 50 / 60 Hz 20.9 kW 28.3 29.4 29.4 ----
E506C 400-415 Vac 3 P+N+E 50 / 60 Hz 19.7 kW 22.5 29.4 29.4 ----
E506B 400-415 Vac 3 P+N+E 50 / 60 Hz 18.5 kW 22.5 23.6 29.4 ----
E506A 400-415 Vac 3 P+N+E 50 / 60 Hz 17.3 kW 22.5 23.6 23.6 ----
E56D 400-415 Vac 3 P+N+E 50 Hz 21.2 kW 29.6 29.4 29.4 100 W
E56C 400-415 Vac 3 P+N+E 50 Hz 20.0 kW 23.8 29.4 29.4 100 W
E56B 400-415 Vac 3 P+N+E 50 Hz 18.8 kW 23.8 23.6 29.4 100 W
E56A 400-415 Vac 3 P+N+E 50 Hz 17.6 kW 23.8 23.6 23.6 100 W
THIS APPLIANCE MUST BE EARTHED. IF SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY A SUITABLY
QUALIFIED PERSON IN ORDER TO AVOID A HAZARD.
Loading ...
Loading ...
Loading ...