Loading ...
Loading ...
Loading ...
English English
18 EN EN 19
5
Connect the power cord to the auto empty station and a wall outlet.
When the auto empty station connects to AC power, the LED indicator on the auto
empty station is solid blue.
• Install the auto empty station in a location that RoboVac can easily access.
It is recommended to place the auto empty station against a wall, and on a
hard, level surface rather than on rugs or carpets.
• Always keep the auto empty station plugged in, otherwise RoboVac will not
automatically return to it.
Use the Auto Empty Station
• RoboVac will return to the auto empty station at the end of a cleaning cycle
or when its battery is running low.
• Make sure the power cord is connected to a power outlet.
• Before emptying the dust box, make sure the mopping module has been
removed.
Attach RoboVac to the auto empty station by aligning its charging pins.
RoboVac starts charging automatically.
If RoboVac has finished a round of cleaning, it will empty its dust box automatically
by default when it returns to the auto empty station. The emptying frequency can
be adjusted in the EufyHome app.
LED Indicator Status of Auto Empty Station
Solid blue Standby
Solid blue, with 50%
brightness
Sleeping mode /
After 10 minutes of inactivity /
Do-Not-Disturb mode
Flashing blue Working normally
Flashing red Working abnormally
• To preserve the battery’s lifespan, recharge at least once every 6 months.
Loading ...
Loading ...
Loading ...