Loading ...
Loading ...
Loading ...
SIGLENT
84 SDS2000X User Manual
Figure 37: IIC TRIGGER Menu
5. Press the Condition softkey and turn the Universal Knob to select the trigger
condition:
If you select the EEPROM condition:
a. Press the Limit Range softkey to set the qualifier (=, < or >).
b. Press Data1softkey and set its value by turning the Universal Knob.
If you select 7 Addr&Data or 10 Addr&Data condition:
a. Press the Addr softkey and turn the Universal Knob to select the 7- bit or 10-
bit device address.
b. Press the Data1 or Data2 softkey and set the value about them.
c. Press the R/W bit softkey and select write-frame or read-frame to trigger the
oscilloscope.
(Tip: If device address is 7-bit, the value of address is in range of 0x00 to 0x7F.If
device’s address is 10-bit, the value of address is in range of 0x00 to 0x3FF.)
If you select the Data Length condition:
a. Press Address soft key to set the SDA address length 7-bit or 10-bit.
b. Press Byte Length softkey and set the byte length by rotating the Universal
Knob. The range of the Byte Length is 1 to 12.
Loading ...
Loading ...
Loading ...