Loading ...
Loading ...
Loading ...
Chapter 3
24
Tools Menu Options
• Automatically restart the printer after
applying new settings
If you select this check box, the printer
automatically restarts after communication
settings are applied.
If you clear this check box, you must restart the
printer manually.
NOTE
When configuring multiple printers, you can
reduce the time required to change settings by
clearing this check box. In this case, we
recommend selecting this check box when
configuring the first printer so that you can
confirm that each setting is operating as
intended.
• Automatically detects the connected
printer, and retrieves the current settings.
If this check box is selected and a printer is
connected to the computer, the printer is
automatically detected and the printer’s current
settings are displayed in the [Current Status]
pane.
NOTE
If the connected printer is different from the
printer shown in the Printer drop-down list the
settings available on all tabs change to match
the connected printer.
• Change Node Name/Bluetooth Device
Name
Allows each node name to be changed.
• Reset to Default Communication Settings
Returns the communication settings to their
factory defaults.
Help Menu Options
3
• Display Help
Displays Help and information about
communication settings.
General Tab 3
Communication Settings 3
• Network Settings on Power On
(TD-2125NWB/2135NWB only)
Specify the conditions for connecting via
network when the printer is turned on. Select
the Wireless LAN by Default, Wired LAN by
Default, or Keep Current State option.
• Selected Interface
(TD-2125NWB/2135NWB only)
Select the Infrastructure, Infrastructure and
Wireless Direct, or Wireless Direct option.
• Bluetooth on Power On (TD-2125NWB/
2135NWB only)
Specify the conditions for connecting via
Bluetooth when the printer is turned on. Select
the On by Default, Off by Default, or Keep
Current State option.
IPv6
3
• IPv6 usage
Select Enable or Disable.
• Priority on IPv6 address
Select to give priority to an IPv6 address.
Wired LAN/Wireless LAN Tabs
(TD-2125NWB/TD-2135NWB
only) 3
TCP/IP TCP/IP (Wireless) 3
• Boot Method
Select the AUTO, BOOTP, DHCP, RARP, or
STATIC option.
• IP Address/Subnet Mask/Gateway
Specify the various networking values. You
can enter these settings only when the IP
address is set to STATIC.
• DNS Server Method
Select the AUTO or STATIC option.
• Primary DNS Server IP Address/Secondary
DNS Server IP Address
Enter these settings only when the DNS server
is set to STATIC.
Loading ...
Loading ...
Loading ...