Loading ...
Loading ...
Loading ...
SHS800X&SHS1000X User Manual
62
WWW.SIGLENT.COM
Figure 26 Turn on the Noise Reject
If the signal you are probing is noisy, you can set up the oscilloscope to reduce
the noise in the trigger path and on the displayed waveform. First, stabilize the
displayed waveform by removing the noise from the trigger path. Second, reduce
the noise on the displayed waveform.
1. Connect a signal to the oscilloscope and obtain a stable display.
2. Remove the noise from the trigger path by setting trigger coupling to
LF
Reject, HF Reject or turning on Noise Reject.
3. Set the Acquisition option to Average to reduce noise on the displayed
waveform.
Loading ...
Loading ...
Loading ...