Loading ...
Loading ...
Loading ...
SHS800X&SHS1000X User Manual
6
WWW.SIGLENT.COM
Figure 7 Connect to Power Supply
Power-on Inspection
When the oscilloscope is energized, press the power key at the lower-left corner
of the front panel to start the oscilloscope. During the start-up process, the
oscilloscope performs a series of self-tests and you can hear the sound of relay
switching. After the self-test is finished, the welcome screen will be displayed.
Connect the Probe
Connect the Probe:
1. Connect the BNC terminal of the probe to a channel BNC connector.
2. Connect the probe tip to the circuit point to be tested and connect the ground
alligator clip of the probe to the circuit ground terminal.
Function Inspection
1. Press the Default button on the front panel to restore the instrument to its
default configuration.
2. Connect the ground alligator clip of the probe to the “Ground Terminal”
Loading ...
Loading ...
Loading ...