Loading ...
Loading ...
Loading ...
SHS800X&SHS1000X User Manual
201
WWW.SIGLENT.COM
4 Press the Stop softkey to stop recording, the record status in the top
information bar is displayed as "Stop".
Display Control
1 Press the Display softkey to enter the DISPLAY settings menu.
2 Press the Vertical Scale softkey and turn the Universal Knob to set the vertical
scale of the trace. Users can also adjust the scale through the vertical scale
button of the channel (mV or V) on the front panel.
3 Press the Horizontal softkey to enter the horizontal display settings menu.
Users can zoom and move the logger trace and set the horizontal reference
position. Press the Auto Set softkey to recover the default state.
4 Press the Display softkey and select All, all traces are displayed in the
waveform area. When a trace is selected, only the selected trace is displayed in
the waveform area. Press the channel button corresponding to the trace to
switch all/individual display.
All Traces Display
Single Trace Display
5 Press the Cursors softkey to enter the cursors function menu. Move the cursor to
obtain the measured value of each point.
a. Press the Status softkey and select ON to turn on the function. Users also
can press the Cursors button to turn on it.
b. Press the Select softkey to select the cursor T1, T2 or T1-T2.
c. Press the Strategy softkey to choose the behavior of cursors when
horizontal scale or position is changed.
Fixed Position: cursors remain fixed to the grid position on the display
Fixed Time: the value of cursors remain fixed.
d. Press the Track Mode softkey to select the track mode of T-Cursors.
Normal: Track the data at the time of T-Cursors
Maximum: Track the maximum value of the data within a pixel where
T-Cursors are located.
Loading ...
Loading ...
Loading ...