Loading ...
Loading ...
Loading ...
SHS800X&SHS1000X User Manual
160
WWW.SIGLENT.COM
Note: if need to delete a setup file in the memory, please save a new setup to the
same location to overwrite it.
Internal Save and Recall
In the following part, the internal save and recall method and procedures are
introduced.
Save the specified oscilloscope setting to internal memory.
1. Connect the signal to the oscilloscope and obtain stable display.
2. Press Shift and Cursors button on the front panel to enter the
SAVE/RECALL function menu.
3. Press the Save softkey to enter the SAVE function menu.
4. Press the Type softkey, turn the Universal Knob to select Setups; and
then press the knob to confirm.
5. Press the Press to Save softkey to enter the disk manager, enter the
“local” directory, and press the Press to Save softkey to save the
current setup.
Load the specified type of file from internal memory.
If want to recall the setup after having finished the steps above, please do
the following steps:
1. Press the Recall softkey enter the RECALLING function menu.
2. Press the Type softkey and then turn the Universal Knob to select Setups;
and then press the knob to confirm.
3. Press the Press to Recall softkey to enter the disk manager, recall the
current setup form the appointed location. After a few seconds, it will
pop-up the message “Recalled file successfully!”
External save and recall
Before using external storage and recall, make sure that the USB flash device is
connected correctly. External storage supports all the types of files in save
, but in
recall, images and CSV are not supported.
Loading ...
Loading ...
Loading ...