Loading ...
Loading ...
Loading ...
SIGLENT
68 User Manual
Figure 3-2 data trace & memory trace
3.3.2.5 Trace Hold
1. Max
Retain the maximum level for each point of the selected trace. Update the data if a new maximum level
is detected in successive sweeps.
2. Min
Display the minimum value from multiple sweeps for each point of the trace and update the data if a
new minimum is generated in successive sweeps.
3. Off
Erases any data previously stored in the selected trace, and display the data sampled in real-time of
each point on the trace.
4. Restart
When select max or min trace hold, the operation “Restart” can empty the trace data and restart the
max or min trace hold.
3.3.2.6 Math
After "Data -> Mem" is executed, you can perform complex data math between the memory trace and
measured data.
The following data math operations are available:
1. Data/Mem
Divide the measured data by the data in the memory trace. This function can be used to evaluate the
ratio of two traces (e.g., evaluating gain or attenuation).
Loading ...
Loading ...
Loading ...