Loading ...
Loading ...
Loading ...
SIGLENT
128 User Manual
7.5.1.3 Scan, Search & Measure
The complete measurement includes scan, peak search and final measurement. After doing peak
search, the signal list will be cleared and populated with the new search result. It will do final
measurement on all signals in the signal list and update the information of the signal list.
7.5.1.4 Scan & Search
A combination of scan and peak search.
7.5.1.5 Search & Meas
A combination of peak search and final measurement.
7.5.1.6 Meas
Do final measurement on the selected signals of the signal list based on Meas settings. You can choose
Current Signal, All Signals or Marked Signals to be selected under menu Meas -> Meas Signal.
7.5.2 Start / Stop Sequence
Start the scan, search or final measurement depending on the sequence selected. When started, the
label on the menu changes to Stop Sequence. The Meters measurement would be invalid during
sequence running. Pressing Stop Sequence will stop the current sequence and meters detector will be
started automatically.
7.5.3 Scan Config
A group of menus let you configure for scan quickly and easily.
7.5.3.1 Start Freq
This is the same as 7.1.1.3 Start Frequency.
7.5.3.2 Stop Freq
This is the same as 7.1.1.4 Stop Frequency
7.5.3.3 CISPR Band
This is the same as 7.1.2.2 Select Band.
7.5.3.4 Dwell Time
Set the dwell time of scan.
Loading ...
Loading ...
Loading ...