Loading ...
Loading ...
Loading ...
SIGLENT
7.5.3.5 Points
This is the same as 7.2.4.3 Sweep Points.
7.5.4 Search
A group of menus let you configure for peak search quickly and easily. This is the same as 7.3.3.3
Search Config.
7.5.5 Meas
7.5.5.1 Meas Signal
Set the remeasure type, either on a current signal, all signals, or the marked signal in the signal list.
● Current Signal: You could set the current signal under menu Meas -> Signal List -> Select Signal.
● All Signals: Do final measurement on all signals in the signal list.
● Marked Signal: You could mark one or more signals to do final measurement under menu Meas ->
Signal List -> Mark Signal.
7.5.5.2 Det
● Switch: Set the selected detector to be used for final measurement or turned to off.
● Dwell Time: Set the dwell time for detectors.
● Limit for: Select the limit used by each detector to get the limit delta value.
7.5.6 Signal List
7.5.6.1 Select Signal
Select one of the signals as current signal in the signal list. When a signal is selected, you can mark,
unmark or delete it from the signal list. It will be relative to 1.4.5.1 Meas Signal.
7.5.6.2 Mark Signal
Mark the current signal.
7.5.6.3 Clear mark
Unmark the current signal.
7.5.6.4 Mark All
Mark all the signals in the signal list.
Loading ...
Loading ...
Loading ...