Loading ...
Loading ...
Loading ...
SIGLENT
effective.
● When “DHCP” is pressed, the LAN parameters are dynamically allocated.
The LAN status icon will be displayed in the upper right corner of the screen if the cable is connected.
Figure 8-1 LAN Config
8.1.3.2 GPIB
Configure GPIB port number. The analyzer provides a digital interface for use with an optional
SIGLENT USB-GPIB module through the front USB port.
8.1.3.3 Web Server
Set web page parameters to use VNC.
1. Port
The port number can be set to 5900~5999. When the port number is set beyond the range, a prompt
pops up at the bottom of the screen, and the port number is automatically set to the maximum or
minimum value.
After modifying the port number, VNC needs to be reopened.
2. Password
Set the password for login VNC.
3. View Only
Set whether the analyzer is in view-only mode on VNC.
When the view-only mode is turned on, the analyzer can only be viewed and cannot be operated on
VNC. When the view-only mode is turned off, the analyzer can be viewed and operated simultaneously
on VNC.
After modifying the view-only mode, VNC needs to be reopened.
Loading ...
Loading ...
Loading ...