Loading ...
Loading ...
Loading ...
5
5
NOTE!
1.
Introduction
Congratulations on the purchase of your new
product. You have chosen a high quality quality
product with this purchase. These operating
instructions form an integral part of this Hammer
Drill (hereafter referred to only as the „drill“).
It contains important instructions on safety, use
and disposal of the product. Please familiarise
yourself with all operating and safety instructions
before using the product. Only use the product
as described and for the stated purpose. If the
product is passed on to a third party, please
provide all documents to the third party together
with the product.
Symbols used
The following symbols and key words are used in
this operating manual, on the hammer drill or on
the packaging.
Mains plug is inserted (green
indicator).
Carbon brushes worn out (red
indicator).
The hammer drill is intended for use
only in places that have a
continuous current rating of ≥ 100 A
per phase and are supplied with a
rated voltage of 120 V by the
distribution network.
WARNING!
Indicates a hazard that, if not avoided, could
result in death or serious injury.
CAUTION!
Signals a hazard that can cause injuries when
ignored.
Warns against possible damages.
Read the operating manual.
Protection category 2
Scope of delivery / parts list
Housing cover for lubrication
ON / OFF Switch
Function selector switch
Unlocking mechanism for drilling / hammer
drilling / chiselling
Anti- vibration handle
Speed control
GREEN LED Indicator
RED LED indicator
Additional handle
Tool holder
Locking sleeve
Depth stop locking latch
Depth stop
Key for lubrication of the housing cover
Accessories (suitable for use with SDS+
system)
-
1 pointed chisel
-
1 flat chisel
-
3 drill bits (6.8, 10,12 & 14 mm)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
≥ 100A
Loading ...
Loading ...
Loading ...