Loading ...
Loading ...
Loading ...
14
14
6.
Troubleshooting
Problem Possible cause Rectification
The drill does not start. Damaged cable. Have the cable replaced by a service center.
Fuse tripped. Check the household fuse box
Carbon brushes worn out. Have the carbon brushes checked by customer
service
Trigger defective Have the trigger switch checked by customer
service
Poor drilling
performance.
Drill bit is blunt. Sharpen or replace the drill bit.
Chuck turns or does
not turn.
Hammer mode on
or off
Function selector switch in
the wrong position.
Function selector switch in
the wrong position.
Check if the function selector switch is inthe
position suitable for your application.
Check if the function selector switch is inthe
position suitable for your application.
7.
Technical data
Model No.: ZSRH-009
Mainsconnection 120 V
~
/ 6
0 Hz
Rated power 12.5 A
No-load speed 0 - 800 rpm
Max. Impact Rate: 0 - 39000 bpm
Impact energy 5.0 Joule
Chuck Chuck suitable for use with SDS+ system
Keyed chuck 1.5 -13 mm
Max drilling capacity 32 mm (concrete)
32 mm (brickwork)
13 mm (steel)
40 mm (wood)
Protection class II
14
Loading ...
Loading ...
Loading ...