Loading ...
Loading ...
Loading ...
12
12
NOTE!
Function selection (Fig. G)
The selector switch should only be
used when the motor has stopped
completely.
Never work with chisel in inserted
(hammer) drilling position or
with the drill inserted in the chisel
position.
•
Unlock the function selector switc 3using the
unlocking latch 4and hold it pressed.
•
Turn the function selector switch so that the
arrow marking points at the desired operation
symbol.
- Drilling. For drilling wood, steel and
similar materials.
-
Hammer drilling. For hammer drilling of
concrete, granite and similar materials.
-
Rotation stop. Adjusting the chisel
position. For continuous adjustment of
the axis. Then rotate the function selector
switch back to the Chiselling position.
-
Chiselling. For light chiselling or chipping.
•
Release the unlock latch.
•
Check if the function selector switch is locked in
place by trying to rotate it without pressing the
unlocking latch.
Drilling and chiselling
Drilling
•
Choose a drill bit appropriate for the
application and insert it into the tool as
described in chapter ‚Inserting the tools‘.
•
Insert the drill bit properly at the desired
location.
•
Press the On / Off switch 2 to start drilling.
.
Do
not
apply
excessive
force on
the
hammer drill.
Excessive
PRESSURE
may
damage
the
drill,
chisel
or
the hammer
drill and
increases
the
risk
of accident.
For
this
reason
is
it
important
to
always
grip
the
drill
firmly
with
two hands
and
maintain
a
stable
posture.
The
greater
the
diameter
of
the
drill
bit,
the
greater
is the
force on YOUR
arm.
Always secure your workpiece
in a vice or in any other clamping
device. Secure particularly large
workpieces against sliding or
support them properly.
Selecting the appropriate drill bit
For drilling concrete Carbide tipped masonry
and stone: drill bit
For Metal HSS drill bit
For wood Twist drill bits for wood
12
WARNING!
Loading ...
Loading ...
Loading ...