Loading ...
Loading ...
Loading ...
13
13
WARNING!
CAUTION!
Chiselling
•
Choose a chisel appropriate for the material
and insert it into the tool as described in chapter
‚Fitting and changing tools‘.
•
Position the the chisel using the rotation stop
position if necessary as described in „Function
selection“ .
•
Insert the chisel properly at the desired location.
•
Press the On / Off switch
2
to start chiselling.
5.
Maintenance, cleaning,
storage and transport
Disconnect the machine from the
mains before performing any
maintenance or adjustments
.
Maintenance
The hammer drill is practically maintenance-free.
Only use spare parts / accessories from the
manufacturer or authorised and qualified
workshops.
Repairs should only be carried out by qualified
technicians or by an authorised service centre.
Qualified technicians must have relevant training
and experience, be familiar with the design and
construction requirements of the product and
understand and follow the safety regulations.
Keep your tool bits always sharp. Sharpen them
always using a suitable tool as recommended by
the tool bit manufacturer.
Refilling the lubricating grease (Fig. I)
In order to avoid ingression of dust and leakage
of grease, the pneumatic part of the hammer drill
is sealed. Refill grease after 50 operating hours
or when the impact power decreases.
•
Open the housing cover for lubrication 1 using
the supplied spanner
16
.
•
Refill with the supplied grease and close the
cover in reverse order. Refill with gear grease
for central lubrication.
•
Spray a small amount of MOS2 oil into the tool
holder if you do not intend to use the drill for a
longer period of time. This prevents the impact
piston from seizing.
Replacing the carbon brushes
The carbon brushes may only be replaced by an
authorised specialist workshop or by qualified
skilled personnel.
Replacing the mains cable
Damaged mains cables may only be replaced
with genuine replacement cables available from
the manufacturer.
The power cord should only be replaced by an
authorised specialist workshop or by qualified
skilled personnel.
Cleaning
Make sure that liquids do not get
inside the hammer drill.
•
Clean the hammer drill regularly with a dry
cloth. Never use strong and / or abrasive
cleaning agents or solvents. Allow all the parts
to dry completely.
•
Ensure that the ventilation slots are not blocked
and clean the housing of the hammer drill
regularly with a soft cloth.
Storage
•
Clean the hammer drill before storage.
•
Keep the hammer drill in a safe, cool, dry
and well-ventilated place, out of the reach of
children when not in use.
•
Store the hammer drill at an ambient
temperature of 0
-
40
°
C.
Transport
•
Use the original packaging and secure the
hammer drill in place during transport.
•
Always carry the hammer drill using the
handle provided for this purpose.
13
Loading ...
Loading ...
Loading ...