Loading ...
Loading ...
Loading ...
EN - 17
EN
Cleaning the coffee bean container
(3) and of the grounds (18) (Fig.A e F)
• Switch the machine on.
• Make sure the coffee bean container (3) is
empty and then press the key (12) to remove
any coffee residues from the grinder.
• Switch the machine off and remove the plug
from the outlet.
• Remove the coffee bean container (3) by
turning it anti-clockwise until the
“ ”
“
”
references are matched with the indicator
(5) and then lift it.
• Remove any coffee beans present in the
grinder using the cleaning brush (33)
supplied.
• Lift the handle (42) of the upper grinder
(18a) and turn it clockwise to remove it.
• Clean the upper grinder (18a) and the
lower grinder (18b) using the brush supplied
(33) if necessary.
•
Re-mount the upper grinder (18a) by matching
the two notches
“ ”
“ ”
and turn it anti-
clockwise to x it
“ ”” ”
.
• Clean the coffee beans container (3) using
a damp cloth and re-mount it by matching
the references
“ ”
“ ”
with the indicator
(5) and then turn it clockwise to attach it.
Thanks to the Twist & Lock system,
it is possible to remove the coffee
beans container (3) even if there
are coffee beans inside and just
clean the grinders (18).
Cleaning the water tank (7)
• Remove the tank lid (6) and remove the tank
from the machine using the relevant handle.
• Clean the tank under running water, dry it
externally and re-mount it.
Cleaning the steam wand (22) (Fig.H)
Clean the steam wand (22) immediately after
use.
• Position the tip of the steam wand on the
cup grill in correspondence with the relative
hole, turn the lever (15)
to the “ ” / “
”
icon for a few seconds to make any milk
remaining inside escape and then take it
back to the vertical position.
• Dry the steam wand (22) using a damp
cloth.
Let the steam wand cool down
before cleaning.
BURNS HAZARD!
• Check that the steam exit hole is not
blocked. In the case of any deposits, clean
the steam exit hole using the relevant needle
supplied (34a).
Cleaning the dispensing unit (20)
(Fig.G)
• Insert the non-pressurised lter for double
coffee (31b) into the lter-holder (20)
• Insert the cleaning disk (32) supplied and
a detergent capsule inside the lter (31b).
Use detergent capsules for
household coffee machines, which
can be found on the market.
• Attach the lter-holder (20) into the dispensing
unit (21) and position a container with
capacity of at least 500 ml under the lter-
holder nozzles.
• Fill the tank (7) with fresh water up to max.
• Hold keys (11) and (14) down for 5
seconds.
• Press the button (14) for 5 seconds to start
the dispensing unit cleaning cycle.
Cleaning and maintenance
Loading ...
Loading ...
Loading ...