Loading ...
Loading ...
Loading ...
caso Pro Menu 1800
16
Attention
Please also adhere to the following instructions for using suitable cookware:
► Only use pots with an induction-compatible base.
► The maximum permissible weight of the pot plus its contents must not exceed
13.25 lbs/6 kg.
► Be careful when using hollow-walled simmer pots. Pots of this type can boil dry unnoticed.
This leads to damage of the pot and cooktop.
5.3 Saftey instructions
Warning
► Do not leave the appliance unattended during operation, so that you can intervene quickly
in the event of danger.
► Do not move the appliance during operation or with hot cookware on the hot plate.
► Ensure that the cookware is properly centered on the cooktop. It must not be positioned on
the control panel or on the frame.
► In order to prevent overheating do not place any aluminum foil or metal panels on the
appliance surface.
► Do not touch the hot surface of the ceramic cooktop.
► Although the induction cooktop itself does not produce any heat during the cooking
process, the temperature of the cookware does heat up the cooktop.
► Keep the cooktop and the underside of the pot clean and dry at all times. If liquid gets
between the base of the pot and the cooktop, this liquid can vaporize and the resulting
pressure can cause the pot to jump into the air, with a resulting risk of injury.
Please note
► Switch the appliance off after use. This avoids unnecessary use of energy, and ensures
your safety.
► If the appliance is unused for extended periods of time, we recommend that the appliance
be unplugged from the mains.
5.4 Operation the Appliance
5.4.1 Switching On
Insert the power plug into the socket
If the stovetop temperature of the induction cooker is lower than 120°F, the display shows
“L”. When the temperature is over 120°F, it will display an “H”. An acoustic signal sounds. Now
the appliance is in standby mode.
Place an induction ready pot or pan in the center of the cooktop.
Now press the ON/STANDBY switch 1. to turn on the
Pro Menu 1800. The control lamps "Level" and “Temp” blink and an acoustic signal sounds.
Loading ...
Loading ...
Loading ...