Loading ...
Loading ...
Loading ...
caso Pro Menu 1800
11
Please note
► Examine the shipment to ensure the appliance and manual are included and inspect the
appliance for any visible damage.
► Immediately notify the carrier and/or the supplier about an incomplete shipment or any
damage as a result of inadequate packaging or mishandling.
3.3 Unpacking
Carefully remove the packaging material and appliance from the carton.
3.4 Disposal of the packaging
The packaging protects the appliance against damages during transit. The packaging
materials are fully recyclable.
Please note
► If possible, keep the original packaging for the appliance for the duration of the warranty
period, so that the appliance can be re-packaged properly in the event of a warranty claim.
3.5 Setup
3.5.1 Setup location requirements:
In order to ensure the safe and trouble-free operation of the appliance, the area where it is to
be used must comply with the following prerequisites:
The appliance must be set up on a solid, even, horizontal surface capable of supporting the
induction cooktop.
The induction cooktop must not be operated on a surface with an iron or steel content, as
this can heat up considerably.
Select a setup location where children cannot reach the appliance.
The appliance is not intended as a built-in appliance.
Do not set up the appliance in a hot or damp environment or near flammable materials.
Do not set up the induction cooktop in the vicinity of appliance and objects which react
sensitively to magnetic fields (e.g.: radios, televisions, tape recorders, etc.).
To operate correctly, the appliance requires sufficient air flow. Leave at least 4 inches (10
centimeters) of space on all sides when setting up the appliance.
The cool air is drawn in by the base of the appliance. Do not cover or block any of the
appliance’s openings.
Do not move the induction cooktop when it is in operation.
The electrical outlet must be easily accessible so that the plug can be quickly disconnected
in case of an emergency.
The setup of this appliance in non-stationary locations (e.g., boats, airplanes, motor homes)
must be carried out by a qualified electrician, provided they guarantee the prerequisites for the
safe use of the appliance.
Loading ...
Loading ...
Loading ...