Loading ...
Loading ...
Loading ...
caso Pro Menu 1800
12
3.5.2 Preventing radio interference:
The appliance can cause interference with radios, televisions or similar appliances.
Interference can be removed or reduced by using the following measures:
Place the radio, television etc. as far away from the appliance as possible.
Connect the appliance to a different socket, so different electric circuits are being used for
the appliance and the receiver experiencing interference.
Use a correctly installed aerial for the receiver in order to ensure good reception.
3.6 Electrical connection
In order to ensure the safe and trouble-free operation of the appliance, the following
instructions must be observed for the electrical connection:
Before plugging in the appliance, compare the voltage and frequency data on the induction
cooktop’s rating plate (found on the bottom of the appliance) with that of your electrical
network. This data must be compatible. If in doubt consult a qualified electrician.
The use of a multi-plug outlet adapter (power strip) is not recommended due to fire danger.
Inspect the power cord for damage and ensure it doesn’t run under the appliance or over
hot or sharp surfaces.
The electrical safety of the appliance is only guaranteed if it is connected to a properly
installed fused system. Use of the appliance without a fuse is prohibited. If in doubt, consult a
qualified electrician. The manufacturer cannot be made responsible for damages due to a
missing or damaged protective conductor.
Make sure that you always use a grounded wall socket to connect the appliance.
This appliance may not be used through an external timer or by means of a remote control.
3.6.1 Extension cords
If an extension cord is used:
► The electrical rating of the extension cord should be at least as great as the electrical rating
of the appliance.
► The cord should be arranged so that it does not drape over a countertop or table top where
it can be pulled on by children or tripped over.
► When using an extension lead always make sure that the entire cable is unwound from the
reel.
3.6.2 Polarization instruction
► To reduce the risk of electric shock, this product has a polarized plug (one blade is wider
than the other). This plug is intended to fit in a polarized outlet only one way.
► If the plug does not fit fully in the outlet, reverse the plug and try again.
► If it still does not fit properly, contact a qualified electrician to install the proper outlet.
► Do not alter the plug in any way.
Loading ...
Loading ...
Loading ...