Senix CSE12-M Operator’s manual

Loading ...

7WWW.SENIXTOOLS.COM

e. Maintain power tools. Check for

misalignment or binding of moving parts,

breakage of parts and any other condition

that may affect the power tools operation.

If damaged, have the power tool repaired

before use. Many accidents are caused by

poorly maintained power tools.

f. Keep cutting tools sharp and clean.

Properlymaintainedcuttingtoolswith

sharp cutting edges are less likely to bind

and are easier to control.

g. Use the power tool, accessories and

tool bits etc. in accordance with these

instructions, taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations different from those intended

could result in a hazardous situation.

5. Service

a. Have your power tool serviced by a

qualied repair person using only

identical replacement parts. This will

ensure that the safety of the power tool is

maintained.

CHAIN SAW SAFETY WARNINGS

• Keep all parts of the body away from

the saw chain when the chain saw is

operating.Beforeyoustartthechainsaw,

make sure the saw chain is not contacting

anything. A moment of inattention

while operating chain saws may cause

entanglement of your clothing or body with

the saw chain.

• Always hold the chain saw with your

right hand on the rear handle and your

left hand on the front handle. Holding

the chain saw with a reversed hand

congurationincreasestheriskofpersonal

injury and should never be done.

NOTE: For chain saws designed with the

chain bar on the left side, the reference to

“right hand” and “left hand” positioning is

reversed.

• Hold the power tool by insulated

gripping surfaces only. The saw chain

may contact hidden wiring or its own cord.

Saw chains contacting a “live” wire may

make exposed metal parts of the power

tool “live” and could give the operator an

electric shock.

• Wear safety glasses and hearing

protection. Further protective equipment

for head, hands, legs and feet is

recommended. Adequate protective

clothingwillreducepersonalinjurybyying

debris or accidental contact with the saw

chain.

• DO NOT operate a chain saw in a tree.

Operation of a chain saw while up in a tree

may result in personal injury.

• Always keep proper footing and operate

the chain saw only when standing on

xed, secure and level surface. Slippery

or unstable surfaces such as ladders may

cause a loss of balance or control of the

chain saw.

• When cutting a limb that is under

tension be alert for spring back. When

thetensioninthewoodbresisreleased

the spring loaded limb may strike the

operator and/or throw the chain saw out

of control.

• Use extreme caution when cutting

brush and saplings. The slender

material may catch the saw chain and

be whipped toward you or pull you off

balance.

• Carry the chain saw by the front

handle with the chain saw switched

off and away from your body. When

transporting or storing the chain saw

alwaystthechainbarcover.Proper

handling of the chain saw will reduce the

likelihood of accidental contact with the

moving saw chain.

• Follow instructions for lubricating,

chain tensioning and changing

accessories. Improperly tensioned or

lubricated chain may either break or

increase the chance for kickback.

• Keep handles dry, clean, and free from

oil and grease. Greasy, oily handles are

slippery causing loss of control.

• Cutwoodonly.DO NOT use chain saw

for purposes not intended. For example:

DO NOT use chain saw for cutting plastic,

masonry or non-wood building materials.

Use of the chain saw for operations

different than intended could result in a

hazardous situation.

Causes and Operator Prevention of

Kickback Kickback may occur when the nose

or tip of the chain bar touches an object, or

when the wood closes in and pinches the

saw chain in the cut. Tip contact in some

Loading ...

Senix CSE12-M 16-inch 12 Amp Corded Electric Chainsaw

Operator’s manual - Page 7