Loading ...
Loading ...
Loading ...
Installation Instructions
265 VOLT ELECTRICAL SUPPLY
[] REINSTALL JUNCTION BOX
•Reinstall the junction box by engaging the tab at the
lo_vr rea_; aligning the screw hole at the top and
driving the one screw tmfil sectlre. Be stlre that all
wire leads are inside the box and not pinched
between the box and the unit. The green insulated
grotmd wire fl'om the unit MUST be connected to
the branch circuit ground wire.
Make all wire connections by using appropriate
UIAisted electrical connectcn_ and techniques
(black to black, whim to white and green to green).
[] REINSTALL JUNCTION
BOX COVER
1Careflfllv rock all wires and
connections back inside the
.junction box. Be sure there
are i1o loose COllllectiolis oI"
stray tminsulated wires
exposed.
2 Place the junction box cover
in place. Replace the two
sci'ews reliloved earlier alld
tighmn secmelv:
3Discard the unused portion of the plug and
the cordset.
POWER CONNECTION CHART
230/208 Volt
Power
Supply Kits
RAK3153
RAK3203
RAK3303*
Wall Plug
Configuration
T;111 d elll
Perpendicular
i,arge Tandem
Circuit Protective Device
I15 Amp Time Delay Fuse or Breaker
20 Amp Tilne Dela_ Fuse or Breaker
30 Amp Tilne Delay Fuse or Breaker
Heater Wattage
@230/208 Volts
2.55/2.09 KW
3.45/2.82 KW
5.00/4.10 KW
265 Volt
Power
Supply Kits
RAK5172
RAK5202
RAK5302*
Wall Plug
Configuration
Does Not Apply
Does Not Apply
Does Not Apply
Heater Wattage
Circuit Protective Device @ 265 Volts
I15 Amp Time Delax Fuse or Breaker
20 Alnp Time Delax Fuse or Breaker
30 Amp Tilne Delay Fuse or Breaker
2.:7: K\,V
3.45 KW
5.0 KW
* Not recommended for use on 7000 BTUH units.
16
Loading ...
Loading ...
Loading ...