Loading ...
Loading ...
Loading ...
Trouble Shooting
VERSATILE MOULDER
©MOFFAT 22 MAY 2003
21
The VERSATILE MOULDER does not
operate/start.
The VERSATILE MOULDER starts
and then stops.
The VERSATILE MOULDER labours
under load.
The VERSATILE MOULDER does not
stop.
The VERSATILE MOULDER belts
operate in wrong direction.
Electric motor functions but belts do
not turn.
Plug in and switch on.
Turn on.
Contact supervisor.
Resets automatically (10 min).
Release by rotating and pulling.
Press Start Button.
Resets automatically (10 min).
If overload occurs repeatedly
contact supervisor/Moffat
Service Agent.
Contact supervisor advise Moffat
Service Agent.
Review and adjust rear belt settings
to a wider gap.
Advise supervisor.
Contact Moffat Service Agent.
Switch off power at main switch
Isolate moulder by removing wall
plug. Attach danger tag to machine.
Contact supervisor advise Moffat
Service Agent.
Consult authorised electrical service
to rewire or change polarity.
Return to correct location.
Contact supervisor advise Moffat
Service Agent.
Not plugged in to socket at main
switch.
The main switch is “off”.
Fuse overload at the power board
The moulder overload has been
activated.
Stop button still locked in down
position.
Start Button not pressed.
The moulder overload has been
activated.
Fuse overload at the power board.
Dough too stiff/tight.
Mechanical malfunction.
Loose belts or drive belts.
Electrical/mechanical malfunction.
Inserting the VERSATILE MOULDER
electrical plug into non-compatible
socket after cleaning.
Relocating VERSATILE MOULDER in
another location after maintenance.
Machine started in wrong direction
causing chain to jump off sprockets.
Problem
Remedy
Possible cause
Loading ...
Loading ...
Loading ...