Loading ...
Loading ...
Loading ...
21
4140
7. Check that the intake tube and spout are not clogged with
milk residues;
8. Dry all the components with a clean dry cloth;
9. Reassemble all the lid components;
10. Attach the lid back on the milk carafe.
Please note:
Each week the appliance reminds you to clean the milk carafe
thoroughly and proposes the correct cleaning sequence again.
16. DESCALING U
Important!
• Before use, read the instructions and labelling on the des-
caler pack.
• Use De’Longhi descaler only. Using unsuitable descaler
and/or performing descaling incorrectly may result in
faults not covered by the manufacturer’s guarantee.
• Descaler could damage delicate surfaces. If the product is
accidentally spilt, dry immediately.
To descale
Descaler De’Longhi descaler
Container Recommended capacity: 2 l
Time ~50min
Descale the appliance when the corresponding message ap-
pears on the homepage (C). To descale immediately, press “OK”
and follow the instructions from point (5).
To descale the appliance later, press “Cancel”. The
symbol
(C4) appears on the homepage to remind you the appliance
needs descaling. (The message appears each time you turn the
appliance on).
To access the descaling menu:
1. Press the settings menu icon
(C3) on the homepage;
2. Scroll through the menu items until “Descaling” is
displayed;
3. Press “Start” to enter the guided descaling procedure;
4. Press “Start” to begin;
5. Insert the water spout (D6) (g. 5);
6. Remove and empty the drip tray (A14) and coee grounds
container (A10) (g. 10), then put both back in the appli-
ance and press “Next”;
7. Remove the water tank (A22), lift the lid (A21) and (if in-
serted) remove the lter (D4). Empty the tank completely.
8. Pour the descaler into the tank up to the level A marked in-
side the tank (equal to one 100ml pack), then add water (one
litre) up to level B (g. 42). Put the water tank (with lid) back
in the appliance and press “Next”
;
4342
2L
B
A
9. Place an empty 2 litre container under the spouts (g. 43).
Press “Next” to start descaling (“Back” to go back to the
previous screen or “X” to exit the procedure, remembering
to remove the descaling solution from the tank)
Important! Danger of scalding
Hot water containing acid ows out of the spouts. Take care to
avoid contact with splashes of this solution.
10. The descale programme starts and the descaler liquid
comes out of the hot water and coee spouts. A series of
rinses is performed automatically to remove all the scale
residues inside the coee machine;
After about 40 minutes, the descaling action ceases;
11. The appliance is now ready to be rinsed through with clean
water. Empty the container used to collect the descaler
solution. Remove the water tank, empty, rinse under run-
ning water, ll with fresh water up to the MAX level and
put back in the appliance (g. 44). Press “Next”;
44
Loading ...
Loading ...
Loading ...