Loading ...
Loading ...
Loading ...
SIGLENT
SDS1000L User Manual 81
■ Save waveforms to USB flash drive
Table 2-45 Save waveforms to USB flash drive function menu:
Option Setup
Introduction
Type Waveforms
Menu for the Storage/Recall waveforms.
Save to File
Save waveforms to USB flash drive.
Save
Accomplish the storage.
Picture 2.12-10
Save waveforms to USB flash drive, follow next steps:
1)Input a sine signal to channel 1, press the “AUTO” button.
2)Press the “SAVE/RECALL” button to enter the “SAVE/RECALL” display menu.
3)Press the “Type” option button to select “Waveforms”.
4)Insert USB flash drive to USB host port of the oscilloscope and wait that the
oscilloscope has initialized USB flash drive (about five seconds).
5)Press the “Save to” option button to select “File”.
6)Press the “Save” option button then you’ll go into the Save/Recall interface.
7)Create a file then press the “Confirm” button (about five seconds, there is a
prompting message that “Save data success” displaying on the screen), now
waveform data have been saved to USB flash drive
Loading ...
Loading ...
Loading ...