Siglent SDS1000CNL User Manual

Loading ...

SIGLENT

SDS1000L User Manual 11

set the trigger level to be halfway between the minimum and maximum

voltage level automatically. This is useful when you connect a signal to the

EXT TRIG connector and set the trigger source to Ext or Ext/5.

■ FORCE: Use the FORCE button to complete the current waveform acquisition

whether the oscilloscope detects a trigger or not. This is useful for Single

acquisitions and Normal trigger mode.

■ SAVE/RECALL: Press to display the Save/Recall menu. You can use the

Save/Recall menu to save and recall up to 20 oscilloscope setups or waveforms

in internal memory (up to 20 waveforms) or on a USB memory device (limited by

memory capacity of USB device). You can also use it to recall the default factory

settings, to save waveform data as a comma-delimited file (.CSV), and to save

or print the displayed waveform image.

■ ACQUIRE: Press to display Acquire menu. You can use the Acquire menu to

set the acquisition Sampling Mode (Sampling, Peak Detect, Average).

■ MEASURE: Press to display a menu of measurement parameters.

■ CURSORS: Display the Cursor Menu. Vertical Position controls adjust cursor

position while displaying the Cursor Menu and the cursors are activated.

Cursors remain displayed (unless the “Type” option is set to “Off”) after leaving

the Cursor Menu but are not adjustable.

■ DISPLAY: Press to open the Display menu. You can use the Display menu to

set grid and waveform display styles, and persistence.

■ UTILITY: Press to open the Utlity menu. You can use the Utility menu to

configure oscilloscope features, such as sound, language, counter, etc. You can

also view system status and update software.

■ DEFAULT SETUP: Press to reset the oscilloscope’s settings to the default

factory configuration.

■ HELP: Enter the online help system.

■ AUTO: Automatically sets the oscilloscope controls to produce a usable display

of the input signals.

■ RUN/STOP: Continuously acquires waveforms or stops the acquisition.

Note：If waveform acquisition is stopped (using the RUN/STOP or SINGLE

button), the SEC/DIV control expands or compresses the waveform.

■ SINGLE: Acquire a single waveform and then stops.

Loading ...

Siglent SDS1000CNL Series Digital Storage Oscilloscopes