Siglent SDS1000CNL User Manual

Loading ...

SIGLENT

14 SDS1000L User Manual

Table 2-2 Auto set the function item

Function Setting

Acquire Mode Adjusted to Sampling

Display Format Y-T

Display Type Set to Dots for a video signal, set to Vectors

for an FFT spectrum; otherwise, unchanged

Vertical Coupling Adjusted to DC or AC according to the input

signal

Bandwidth Limit Off(full)

V/div Adjusted

VOLTS/DIV adjustability

Coarse

Signal inverted Off

Horizontal position Center

S/div Adjusted

Trigger type Edge

Trigger source Auto detect the channel which has the input

signal

Trigger slope Rising

Trigger mode Auto

Trigger coupling DC

Trigger holdoff Minimum

Trigger level Set to 50%

2.4 Default Setup

The oscilloscope is set up for normal operation when it is shipped from the factory.

This is the default setup. To recall this setup, press the DEFAULT SETUP button.

The options, buttons and controls that change settings when you press the

DEFAULT SETUP button, refer to appendix B.

The DEFAULT SETUP button does not reset the following settings:

● Language option

● Saved reference waveform files

● Saved setup files

● Display contrast

● Calibration data

Loading ...

Siglent SDS1000CNL Series Digital Storage Oscilloscopes