Loading ...
Loading ...
Loading ...
Using the RS 5200’s additional functions
36 | RS 5200
Select a suitable country adapter and slide it onto the power supply
unit until it clicks audibly into place.
1. Connect the connector of the power supply unit to the connection
socket of the MCA 800 charging adapter.
2. Plug the power supply unit into the wall socket.
3. Connect the charging adapter to the charging contacts on the
stethoset receiver. The charging adapter is magnetically oriented
to the correct position.
The rechargeable battery is being charged. The LED on the
charging adapter lights up red. When the rechargeable battery is
fully charged, the LED lights up green.
If the LED on the charging adapter flashes red and green, a charging
error/battery error has occurred. In this case, disconnect the
charging adapter from the stethoset receiver. For additional informa-
tion on the rechargeable battery, see page 29.
WARNING
Interference due to magnetic fields!
The MCA 800 charging adapter generates stronger permanent mag-
netic fields that could cause interference with cardiac pacemakers,
implanted defibrillators (ICDs) and other implants
▷ Always maintain a distance of at least 3.94" (10 cm) between the
holding magnets of the charging adapter and the cardiac pace-
maker, implanted defibrillator or other implant.
You can also use the stethoset receiver during charging. Please
note, however, that the receiver can get slightly warm during
charging. The charge status of the rechargeable battery is dis-
played on the transmitter (see page 15).
3 h
100 %
US
EU
UK
AU
21
3 4
Loading ...
Loading ...
Loading ...