Loading ...
Loading ...
Loading ...
Putting the RS 5200 into operation
RS 5200 | 15
Connecting the transmitter to the power
supply system
▷ Connect the connector of the power supply unit to the yellow
socket of the transmitter.
▷ Select a suitable country adapter and slide it onto the power
supply unit until it clicks audibly into place.
▷ Plug the power supply unit into the wall socket.
▷ All LEDs on the transmitter light up for 5 seconds. The transmitter
is in standby mode.
Charging the stethoset receiver’s
rechargeable battery
A complete charging cycle takes about 3 hours. Before using the
receiver for the first time, charge its rechargeable battery for a com-
plete charging cycle without interruption.
When the rechargeable battery is almost empty, the
Receiver status
LED lights up red and you hear 2 beeps in the stethoset receiver. The
Battery
LED on the transmitter flashes white. The stethoset
receiver switches off after a few minutes.
▷ Place the stethoset receiver into the transmitter’s charging com-
partment so that the volume buttons face upwards. The stethoset
receiver is magnetically oriented to the correct position. The ste-
thoset receiver automatically switches off and the
Battery
LED
on the transmitter lights up white. The LED segments display the
charge status of the rechargeable battery. When the recharge-
able battery is fully charged, all LED segments light up white.
US
EU
UK
AU
2
1
3
Power
1A
1A
Loading ...
Loading ...
Loading ...