Loading ...
Loading ...
Loading ...
Using the RS 5200
24 | RS 5200
All hearing profiles feature a compression function which compen-
sates for volume differences by boosting the volume of quiet pas-
sages and reducing the volume of loud passages if necessary.
Displaying the activated hearing profile
The activated hearing profile is not permanently displayed.
To check the activate hearing profile:
▷ Switch the stethoset receiver on by putting it on (see page 20).
▷ Briefly press the Hearing profile button on the transmitter.
The currently activated hearing profile is displayed for 10 sec-
onds.
Selecting a hearing profile
To select the hearing profile that best suits you, proceed as follows:
The balance setting is saved on the stethoset receiver. If you
are using several receivers with a transmitter, the respective
receivers are optimally adjusted to match the personal hearing
preferences of the users (e.g. you and your partner). Please
note that the personal hearing preferences can only be
adjusted when only stethoset receiver is connected to the
transmitter.
2s
Activated
hearing profile
Hearing profile LED
Sound enhancement Compression
–
No LED segment lit
The sound from the connected audio
source is reproduced unchanged.
no
Hearing profile 1
1
st
LED segment lit
Low-frequency tones are slightly
boosted to provide a warm, full sound.
High-frequency tones are reproduced
less piercing and clanking.
yes
Hearing profile 2
2
nd
LED segment lit
High-frequency tones are strongly
boosted to provide a crystal-clear sound,
especially for sibilants and high-
frequency tones such as twittering of
birds.
yes
Hearing profile 3
3
rd
LED segment lit
Low-frequency tones are attenuated so
that they cannot mask high-frequency
tones.
yes
For a graphic representation of the hearing profiles, see page
41.
Loading ...
Loading ...
Loading ...