Loading ...
Loading ...
Loading ...
Pedometer
Q1
Displayed step count is not correct.
While the watch is on your wrist, the
pedometer may detect non-step movements
and count them as steps.
l
Pedometer
Also, step count problems can also be caused
by how the watch is being worn and abnormal
arm movement while walking.
l
Counting Steps
Q2
The step count does not increase.
The step count is not displayed at the
beginning of a walk in order to avoid
miscounting of non-walking movements.
It appears only after you have continued
walking for about 10 seconds, with the number
of steps you took during the first 10 seconds
included in to the total.
Q3
[ERR] appears when using the
pedometer.
[ERR] (error) indicates that sensor operation
is disabled because of sensor or internal
circuitry malfunction.
If the indicator remains on the display for more
than three minutes or if it frequently appears,
it could indicate a faulty sensor.
Alarm
Q1
The alarm does not sound.
Is the alarm setting turned on? If it isn’t, turn it
on so it will sound.
l
Enabling/Disabling an Alarm or the Hourly
Time Signal
Hand Movement and
Indications
Q1
I don’t know what mode the watch is
in.
You can determine the current mode by
checking the watch display. Use (C) to
navigate between modes.
l
Navigating Between Modes
Q2
All hands are stopped and buttons do
not work.
The battery is dead. Request battery
replacement by your original retailer or
authorized CASIO service center.
l
Battery Replacement
Q3
The hands suddenly start moving at
high speed.
This is due to one of the reasons below, and
does not indicate malfunction. Simply wait
until normal hand movement resumes.
●
Watch is connected with a phone to adjust
its time setting.
l
Auto Time Adjustment
Q4
The current time indicated by the
watch is off by one hour or 30
minutes.
The summer time setting is not correct. Select
the correct setting.
l
Changing the Home City Summer Time
Setting
Q5
The time indicated by the hands is
different from the digital time.
Strong magnetism or impact can cause the
hands to go out of alignment. Adjust hand
alignment.
l
Adjusting Hand Alignment
●
Check the information below to find out how
to align the hands manually.
l
Hand Alignment Adjustment
Battery
Q1
is flashing on the digital display.
This indicates that battery power is getting
low. Request battery replacement by your
original retailer or authorized CASIO service
center.
l
Battery Replacement
Q2
[R] is flashing on the digital display.
This happens when battery power is low or
after the light or some other function is turned
on repeatedly over a short amount of time,
which temporarily runs down the battery. All
functions other than timekeeping are disabled
while [R] is flashing on the display.
If [R] remains on the display or if it keeps
appearing, it may indicate that the battery
needs to be replaced.
Request battery replacement by your original
retailer or authorized CASIO service center.
Operation Guide 5554/5555
24