Loading ...
Loading ...
Loading ...
Q2
I can’t connect while my phone is in
the Airplane Mode.
After exiting the phone’s Airplane Mode, go to
its Home Screen and tap the “G-SHOCK
Connected” icon.
Next, on the watch, hold down MODE (C) for
about two seconds to enter the Timekeeping
Mode. After that, hold down CONNECT (D) for
about two seconds to establish a connection
between the watch and phone.
Q3
I changed the phone’s Bluetooth
from enabled to disabled, and now I
can’t connect anymore.
On the phone, change the Bluetooth setting
from disabled to enabled, and then go to the
Home Screen and tap the “G-SHOCK
Connected” icon.
Next, on the watch, hold down MODE (C) for
about two seconds to enter the Timekeeping
Mode. After that, hold down CONNECT (D) for
about two seconds to establish a connection
between the watch and phone.
Q4
I can’t connect after turning off the
phone.
Turn on the phone. On the Home Screen, tap
the “G-SHOCK Connected” icon.
Next, on the watch, hold down MODE (C) for
about two seconds to enter the Timekeeping
Mode. After that, hold down CONNECT (D) for
about two seconds to establish a connection
between the watch and phone.
Phone-Watch Connection
Q1
I can’t establish a connection
between the phone and watch.
Have you tried turning your phone off and
then back on again?
Turn the phone off and then back on
again. On the Home Screen, tap the “G-
SHOCK Connected” icon.
Next, on the watch, hold down MODE (C)
for about two seconds to enter the
Timekeeping Mode. After that, hold down
CONNECT (D) for about two seconds to
establish a connection between the watch
and phone.
Has the watch been re-paired with the
phone?
After deleting pairing information from G-
SHOCK Connected, re-pair them.
l
Unpairing
If you are unable to establish a
connection...
Use the procedure below to delete the
pairing information from the watch, and
then re-pair the watch and phone.
A
Hold down (C) for about two seconds
to enter the Timekeeping Mode.
B
Hold down (A) until [SET] stops
flashing on the display.
C
Press (C).
D
Hold down (B) until [CLR] stops
flashing on the display.
E
Press (A) to exit the setting screen.
Changing to a Different
Phone Model
Q1
Connecting the current watch to
another phone.
Pair the watch with the phone.
l
If you purchase another phone
Auto Time Adjustment by
Bluetooth Connection (Time
Adjustment)
Q1
When does the watch adjust is time?
The watch will connect with the phone and
perform auto time adjustment at around 12:30
a.m., 6:30 a.m., 12:30 p.m. and 6:30 p.m. The
connection is automatically terminated after
auto time adjustment is complete.
Q2
Auto time adjustment does not start.
Did you recently swap your Home Time
and World Time, or manually adjust the
watch’s time setting?
Note that auto time adjustment is not
performed for 24 hours after swapping of
the Home Time and World Time, or after
the time setting is adjusted manually on
the watch. Auto time adjustment will
resume 24 hours after either of the above
operations is performed.
Is auto time adjustment enabled?
Auto time adjustment will not be
performed at the scheduled times unless
it is enabled. Enable auto time
adjustment.
l
Using the Watch in a Medical Facility or
Aircraft
Q3
Time is not displayed correctly.
The phone’s time setting may be incorrect
because it is unable to connect with its
network due to being out of range, etc. If this
happens, connect the phone to its network
and then adjust the time setting.
Operation Guide 5554/5555
23
Loading ...