Loading ...
Loading ...
Loading ...
Mounting Belt and Disc Sander On Legset
1. Place the belt and disc sander on steef legs, position
as shown, and align the mounting holes in the base of
the belt and disc sander with those in the end stiffeners
(marked with an 'X' in the illustration).
O O
go
b°
|
i !
I
!i
I
I
I
I
t
..... _7i_ -1
2. Mount the sander base to the end stiffener/channel
support. Use two 5/16-18 x 2-1/2" hex head screws,
flat washers, (4) external Iockwashers, and (2) hex
nuts,
HEX HD. SCREW
HEX HD
LOCKWASHER
HEX
HEX NUT
•LOCKWASHER
MOTOR MOUNT
BRACKET
THIS SIDE
Installing V-Belt and Switch
1. Loosen the belt table locking bolts behind the mount-
ing bracket using a 1/2" wrench which is provided in
loose parts bag.
2. Position belt table vertically and tighten only one of the
bolts.
3. Place the V-belt on the pulley.
4. Attach the switch assembly to the base using the two
screws and washers packed with the switch.
5, Loosen the bolt that you tightened in step 2. Position
the belt table horizontally, and tighten both bolts. I
MOUNTtNG '
BRACKET i
V-BELT
BELT TABLE LOCKING BOLT
WRENCH (.PROVIDED)
SWITCH
ASSEMBLY
9
Loading ...
Loading ...
Loading ...