Blackmagic Design SWATEMSCN2/1ME1/HD User Manual

Loading ...

If the DVE is being used in an upstream key, the DVE transition style button will be

unavailable for selection until the key is taken off air and off next transition. Refer to sharing

DVE resources below for more information.

Use the settings in the DVE palette to customize the transition.

4 Perform the transition as an auto transition or manual transition from the transition

control block.

DVE Transition Settings

DVE Transition Parameters

Pattern Select between push and squeeze for the DVE pattern

Movement Movement lets you set the direction for the pattern transition.

DVE Rate The duration of the DVE transition in seconds and frames. On ATEM advanced

panels rotate the DVE rate knob to adjust the DVE transition rate. The new rate is

immediately displayed in the transition rate window in the transition control block.

Direction The normal direction applies the DVE effect on program, revealing

the preview channel.

Reverse Direction Reverse changes the direction so that the DVE effect is applied on the preview

channel. In the case of reverse, program is covered by a DVE effect with the

preview video.

Flip Flop When flip flop mode is toggled on, the transition changes between normal and

reverse every time the transition is executed.

To perform a DVE transition on an ATEM advanced panel:

1 On the preview bus, select the video source that you

want on the program output.

2 Press the DVE transition type button to select the

DVE transition. The DVE settings will appear on

the LCD menu.

NOTE If the DVE is already being used in

an upstream key, the DVE transition type will

not be available for selection until the key is

taken off air and off next transition. Refer to

‘sharing DVE resources’ later in this section for

moreinformation.

3 In the DVE LCD menu, use the soft control knobs and

buttons to configure the DVE parameters. For example,

select the DVE pattern, movement, direction and

adjust the DVE transition rate. Use the ‘left’ and ‘right’

arrow buttons to the side of the LCD to navigate to the

additional settings.

4 Perform the transition as an auto or manual transition

using the auto button or fader bar.

98Operating your ATEM Switcher

Loading ...

Blackmagic Design SWATEMSCN2/1ME1/HD ATEM 1 M/E Constellation HD Live Production Switcher 1 RU