Loading ...
Loading ...
Loading ...
Wipe Transition Settings
Wipe Transition Parameters
Rate The length of the wipe transition in seconds and frames.
Symmetry Symmetry can be used to control the aspect ratio of the pattern.
For example, adjusting the symmetry will allow you to change a circle into
an ellipse. On the advanced panel symmetry can be adjusted using the z
axis of the joystick or via the control knob.
Position If the wipe pattern has positioning then the joystick or control knobs on the
advanced panel or the x position: and y position: boxes in the transition
palette of the software control panel can be used to move the center of
the pattern. Moving the joystick dynamically updates the x and y position
display in the software control panel.
Reverse Direction Reverse changes the progression of closed patterns such as circles,
diamonds and boxes so that the pattern closes in from the edges of the
screen toward the center. The text will illuminate orange when selected.
Flip Flop When flip flop mode is toggled on, the transition changes between normal
to reverse every time the transition is executed. The text will illuminate
orange when selected.
Border Softness The edges of the wipe pattern can be adjusted between sharp and fuzzy by
adjusting the softness parameter.
Border Width of the border.
Border Fill Source The border source used in a wipe transition can be any source in the
switcher. For example, a thick border with the media player as its source
can be used for sponsorship or branding.
To perform a wipe transition on an ATEM advanced
panel:
1 On the preview bus, select the video source that you
want on the program output.
2 Press the WIPE button to select the wipe transition
type. The LCD menu will automatically display the
transition settings.
3 Use the system control knob to select the wipe
pattern and rate. The buttons can be used to select
the wipe direction.
4 Use the arrow buttons to the left of the LCD button to
navigate all the available wipe properties including
position, symmetry and border source.
5 Perform the transition as an auto transition or manual
transition from the transition control block.
95Operating your ATEM Switcher
Loading ...
Loading ...
Loading ...