Loading ...
Loading ...
Loading ...
...... !,
!
..... i
ASS
INSTALL BATTERY (See Figs. 4 & 5)
CAUTION: Do not short battery termi-
nals. Before installing battery, remove
metal bracelets, wristwatch bands,
rings, etc.
Positive terminal must be connected
first to prevent sparking from acciden-
tal grounding.
• Lift seat to raised position.
• Lower battery into fender well with battery terminals
toward front of unit. Make sure battery rests in battery
tray.
, Be sure battery drain tube has not come loose and is
securely attached to drain in battery tray.
• First connect RED battery cable to positive (+) battery
terminal with hex bolt, flat washer, Iockwasher and hex
nut as shown. Tighten securely.
o Connect BLACK grounding cable to negative (-) bat-
tery terminal with remaining hex bolt, flat washer, lock-
washer and hex nut. Tighten securely,
° Slide the two battery bolts through the terminal guard
and start the wing nuts onto the threads.
• Position terminal guard over the battery as shown,
lower bolts into key holes and slide square shafts of
bolts into slots of key holes.
• Tighten wing nuts by hand making sure battery bolts
remain in slots of the key holes in the battery support.
• Be sure terminal access doors are closed.
Use terminal access doors for:
• inspection for secure connections (to tighten hard-
ware).
o Inspection for corrosion.
• Testing battery.
• Jumping (if required).
, Periodic charging.
POSITIVE (+) NEGATIVE (-)
TERMINAL TERMINAL
POSITIVE (R ED) NEGATIVE
CABLE (BLACK)
FLATWASHERS CABLE
\
HEX NUT
LOCKWASHERS
HEXNUT
FIG. 4
LY
WING
NUT
TERMINAL GUARD ACCESS
DOOR
BATTERY VENT CAPS i_"_
;L
BOLT , _!i_._
KEY BATTERY BATTERY
HOLE BRAIN TUBE TRAY
FIG, 5
7CHECKMST
BEFORE YOU OPERATE AND ENJOY YOUR NEW
TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE
THE BY-"STPERFORMANCEAND SA TISFA CTtON FROM
THIS QUALITY PRODUCT.
PLEASE REVIEW THE FOLLOWING CHECKLIST."
¢' All assembly instructions have been completed,
v" No remaining loose parts in carton,
,/ Battery is properly prepared and charged. (Minimum
1 hour at 6 amps).
V" Seat is adjusted comfortably and tightened securely.
,/ All tires are properly inflated. (For shipping purposes,
the tires were over-inflated at the factory).
¢" Be sure mower deck is properly leveled side-to-side/
front-to-rear for best cutting results. (Tires must be
properly inflated for leveling),
,/ Check mower and drive belts, Be sure they are routed
properly around pulleys and inside all belt keepers.
¢" Check wiring, See that aIf connections are still secure
and wires are properly clamped.
WHILE LEARNING HOWTO USE YOUR TRACTOR, PAY
EXTRA ATTENTION TO THE FOLLO WING IMPORTANT
ITEMS:
v" Engine oil is at proper level.
,/ Fuel tank is filled with fresh, clean, regular unleaded
gasoline.
v" Become familiar with all controls - their location and
function, Operate them before you start the engine.
,/ Be sure brake system is in safe operating condition.
9
Loading ...
Loading ...
Loading ...