Loading ...
Loading ...
Loading ...
.....i
CEA ADJUSTM
NTS
TO REPLACE FUSE (See Fig. 30)
Replace with 30 amp automotive-type plug-in fuse. The
fuse holder is located in the engine compartment, directly
in front of the dash,
FUSE
HOLDER
i
SCREW
FIG, 31
FIG. 30
TO REPLACE HEADLIGHT BULB
• Raise hood.
• Pull bulb holder out of the hole in the backside of the
grill.
" Replace bulb in holder and push bulb holder securely
back into the hole in the backside of the grill.
• Close hood.
INTERLOCKS AND RELAYS
Loose or damaged wiring may cause your tractor to run
poorly, stop running or prevent it from starting.
• Check wiring. See electrical wiring diagram in Repair
Parts section of this manual.
TO REMOVE HOOD, GRILL AND SIDE PAN=
ELS (See Fig's. 31 and 32)
• Raise hood.
• Unsnap headlight wire connector.
• Remove screw at rear of each side panel.
° Pivot hood and side panel forward and lift off tractor,
• To replace, reverse above procedure.
WIRE
CONNECTION --
FIG. 32
23
Loading ...
Loading ...
Loading ...