Loading ...
Loading ...
Loading ...
5
5-101
Manual Temperature Control
Mode
The heating and cooling system can be
controlled manually by selecting
functions other than AUTO. In this case,
the system works sequentially according
to the order of the functions selected.
When selecting any other functions
except AUTO while using automatic
operation, the functions not selected will
be controlled automatically.
1. Start the vehicle.
2. Set the mode to the desired position.
To improve the effectiveness of heating
and cooling, select the mode according
to the following:
• Heating:
• Cooling:
3. Set the temperature control to the
desired position.
4. Set the air intake control to Fresh or
Recirculation mode.
5. Set the fan speed control to the desired
speed.
6.If air conditioning is desired, turn the air
conditioning system on.
7. Select AUTO to revert back to full
automatic control of the system.
The climate control system settings will
be maintained, even when the vehicle is
turned off. However, the climate control
system settings will be initialized when
the battery has been discharged, or when
the cables have been disconnected.
In this case, adjust the climate control
system settings again.
When starting the vehicle in cold weather
using manual temperature control,
operate the system in the following
method to improve heating.
• Turn off or lower the blower, right after
starting the engine.
• Allow the engine to warm up during this
time since the air flow from the heater
is still cold.
• During this time, operate the seat and
steering wheel warmer (if equipped) to
provide additional heating if needed.
• After a few minutes of engine warm up,
turn on or set the fan to a higher level
and adjust the temperature setting to
hot.
JK1_en_US.book Page 101
Loading ...
Loading ...
Loading ...