Loading ...
Loading ...
Loading ...
5-84
Convenience Features
High beam operation
OJX1059062
To turn on the high beam headlight, push
the lever away from you. The lever will
return to its original position.
The high beam indicator will light when
the headlight high beams are switched
on.
To turn off the high beam headlight, pull
the lever towards you. The low beams will
turn on.
OJX1059061
To flash the high beam headlight, pull the
lever towards you, then release the lever.
The high beams will remain ON as long as
you hold the lever towards you.
Turn signals and lane change signals
OJX1059065
To signal a turn, push down on the lever
for a left turn or up for a right turn in
position (A).
If an indicator stays on and does not flash
or if it flashes abnormally, one of the turn
signal bulbs may be burned out and will
require replacement.
One touch turn signal
To use One Touch Turn Signal push the
turn signal lever up or down to position
(B) and then release it.
The lane change signals will blink 3, 5 or 7
times.
You can enable the One Touch Turn
Signal function or choose the number of
blinking by selecting ‘Setup > Vehicle >
Lights > One Touch Turn Signal (or
One-touch indicator) > 3 flashes/5
flashes/7 flashes/Off’ in the infotainment
system.
See additional information in supplied
Infotainment Manual.
JK1_en_US.book Page 84
Loading ...
Loading ...
Loading ...