Loading ...
Loading ...
Loading ...
5-42
Convenience Features
Recalling Memory Positions
1. Shift to P (Park) while the Engine
Start/Stop button is in the ON position.
2. Press the desired memory button (1 or
2). The system will beep once, and then
the driver’s seat position, side view
mirror position, steering wheel position
and head-up display height will
automatically adjust to the stored
positions.
3. ‘Driver 1 (or 2) settings applied’ will
appear on the cluster LCD display.
Information
• Note that while the memory settings
are being recalled, if you press the SET
button or the corresponding IMS
memory button (1 or 2) for which the
settings are being recalled, the IMS will
temporarily deactivate. If you select the
alternate IMS memory button (1 or 2),
the IMS will activate according to the
settings of the alternate button.
For example, if you press the SET
button or the number 1 button with the
number 1 setting in operation, the IMS
will temporarily deactivate.
If you press the number 2 button, then
the IMS memory settings according to
number 2 will activate.
• If you adjust the driver’s seat, side view
mirror, steering wheel or head-up
display while the IMS is recalling the
stored positions, the memory settings
will not be applied.
Resetting the System
Follow the below procedures to reset the
Integrated Memory System (IMS) if it is
not operating properly:
Resetting integrated memory
system
1. Stop the vehicle and open the driver’s
door with the vehicle shifted to P (Park).
2. Adjust the driver’s seat and seatback to
the foremost position.
3. Press the SET button and push forward
the driver’s seat switch simultaneously
(about two seconds).
4. Release the SET button and the driver’s
seat switch when a beep sounds.
While resetting integrated memory
system
1. Resetting starts with a notification
sound.
2. The driver’s seat and seatback is
adjusted to the rearward position with
the notification sound.
3. The driver’s seat and seatback is
re-adjusted to the default position
(central position) with the notification
sound.
However, in the following cases, the
resetting procedure and the notification
sound may stop.
• The memory button is pressed.
• The seat control switch is operated.
• The gear is shifted out of P (Park)
• The driving speed exceeds 2 mph (3
km/h).
• The driver’s door is closed.
JK1_en_US.book Page 42
Loading ...
Loading ...
Loading ...