Loading ...
Loading ...
Loading ...
9
CONTROLS AND SETTINGS
Opening the Door During
Operation
When the door is opened a running
cycle is paused. Once the Start button
is pressed the corresponding LED stops
blinking and stays on and the Close LED
blinks. If the door is not closed within 4
seconds the Start LED will blink, and a
reminder tone sounds every 30 seconds
until Start or Cancel is pressed. The tone
will sound a maximum of 5 times. If a
cycle is paused the floor indicator light
stays ON until the door is open. If the
door is closed without pressing the Start
button, The floor indicator light turns o.
If the cycle is paused it is not possible to
change program or options unless the
running one is canceled.
NOTE
Opening the door during normal
operation pauses the wash cycle.
NOTE
The Control Lock LED will blink three
times and then stay lit if any buttons
are pressed while control lock is active.
NOTE
If the dishwasher door is kept open for
too long, or the door is closed without
pressing the START button, the running
cycle or delay countdown may be
canceled.
To Resume a Wash
If cycle is paused, the floor indicator light
stays ON until the door is open. If the
door is closed without pressing start, the
floor indicator turns o.
Once the Start button is pressed the
corresponding LED stops blinking and
stays on and the Close LED blinks. If the
door is not closed within 4 seconds the
Start LED will blink, and a reminder tone
sounds every 30 seconds until Start or
Cancel is pressed. The tone will sound a
maximum of 5 times.
Open the door to enable the buttons,
press Start and close the door within 4
seconds to resume the wash cycle.
The control panel will go into sleep
mode if there is no interaction with the
Start button, door, or other buttons for a
period of 5 minutes.
Cancel a Wash
Press the Cancel button to cancel a
running wash cycle. When a cycle is
canceled, the tub drains either on door
close within 4 seconds upon touching
the Cancel button (to avoid soiled water
sitting in the tub) or at the beginning of
the next wash.
When a wash is canceled, the tub will
drain of any water for about 1 minute
during which the LED above the Cancel
button and the floor indicator light are lit.
Change Options After a Wash or
Delayed Wash Starts
A running wash cycle must be canceled
to reselect options for a running cycle.
NOTE
Opening the door while the dishwasher
is draining will cancel the drain cycle.
Draining will then complete before the
next wash starts.
If the newly selected wash option cannot
be selected, the LED button for that
option will blink 3 times and then turn o.
Loading ...
Loading ...
Loading ...