Loading ...
Loading ...
Loading ...
7
CONTROLS AND SETTINGS
Option Selections
2
Selecting a Dry Setting
Touch and slide to select a dry
setting based on the touch release
point. Updates to the cycle time
display in the status window.
Releasing the slide input between
dry programs will select the Medium
Dry program.
Air Dry
If the Air Dry option is selected,
the heating element is not used
during the dry cycle. This reduces
energy consumption and drying
performance. Items in the dish load
may not be dry at the end of the
cycle.
MaxBoost
The cycle time increases when
MaxBoost is selected.
Eco
For lightly soiled and pre-rinsed
dishes and silverware. Water
usage ranges from approximately
4.3 to 7.7 gallons. Wash time is
about 86 min with Air Dry, 96 min.
with Medium Dry, and 229 min
with MaxBoost. 3 Eco leaf icons
illuminate when the Eco cycle is
selected.
Delicate
For lightly soiled China and Crystal.
Water usage is approximately 4.9
gallons. Wash time is about 95 min.
with Air Dry and Medium Dry, and
136 min. with MaxBoost.
Heavy
For pots, pans, casserole dishes
and dinnerware with dried-on
or baked-on soils. Water usage
ranges from approximately 7.1 to
8.1 gallons. Wash time ranges from
approximately 170 to 214 min.
Sanitize
Select the Sanitize cycle to sanitize
your dishes and glassware. This
cycle heats the water temperature
in the final rinse to 157°F (69.4°C)
and maintains that temperature for
7 minutes.
The cycle time is extended until the
proper water temperature is reached,
and washing continues during the
water heating delay. For best results,
the incoming water temperature should
be at least 120°F (49°C). Wash time
is about 217 min. with Air Dry, and
with Medium Dry, and 231 min. with
MaxBoost.
The sanitation criteria may not be
satisfied if there is an interruption
of the cycle, a power failure occurs,
or if incoming water temperature is
below 120°F (49°C).
When a sanitized cycle has
completed, the Sanitize LED is
illuminated if NSF req. for sanitization
are reached. The LED stays on after
the door is opened.
If NSF requirements for sanitization are
NOT reached the LED is o at cycle
end. The LED starts blinks twice then
goes out after the door is opened.
3
Delay
The Delay option allows you to
automatically delay starting your
dishwasher from 1-12 hours.
Select your desired cycle and
options, then press the Delay
button to advance the delay time in
one-hour increments until desired
time delay is reached. Pressing the
delay button displays the delayed
time in the status window and
illuminates the LED above the Delay
button to indicate a delay is active.
The delay time function is canceled
if the delay time button is pressed
again when 12 hours of the selected
delay time. Press and hold the delay
button to quickly cycle through the
delay time from 1-12 hours.
Operation Selections
NOTE
If the selected dry setting is unavailable
for the selected wash cycle, The LED
above the dry option will blink three
times and then turn o indicating that
the dry option was not selected.
Loading ...
Loading ...
Loading ...