Frigidaire GDSH4715AF Gallery 24" Stainless Steel Tub Built-In Dishwasher with CleanBoost

User Manual - Page 20

For GDSH4715AF.

PDF File Manual, 28 pages, Read Online | Download pdf file

GDSH4715AF photo
Loading ...
Loading ...
Loading ...
20
CARE AND CLEANING
Winterizing
A dishwasher left in an unheated place
should be protected from freezing. Have a
qualified person do the following.
To Disconnect Service:
1. Turn o electrical power to the
dishwasher at the supply source by
removing fuses or tripping circuit
breaker.
2. Shut o water supply.
3. Place a pan under the inlet valve.
Disconnect water line from the inlet
valve and drain into pan.
4. Disconnect drain line from pump
and drain water into pan.
To Restore Service:
1. Reconnect the water, drain, and
electrical power supply.
2. Turn on water and electrical power
supply
3. Fill detergent cup and run the
dishwasher through a HEAVY wash
cycle.
4. Check connections to make sure
they do not leak.
Removing spots and film
Hard water can cause lime deposit
buildup on the interior of the dishwasher.
Dishes and glasses may also get spots
and film for a number of reasons. (See
Glassware/Flatware Spotted or Cloudy
section). To remove buildup, and film,
clean using the following instructions:
1. Load clean dishes and glasses in
normal manner. Do not load any
metal utensils or silverware.
2. Do not add detergent.
3. Select the NORMAL cycle. Press
START. Close and latch the door.
4. Allow dishwasher to run until
it starts the second water fill
(approximately 10 minutes).
5. Unlatch and open door and pour
2 cups of white vinegar into the
bottom of dishwasher.
6. Press START. Close and latch door
and allow cycle to finish.
CAUTION
Freezing temperatures may cause water
lines to rupture. Be sure all supply lines
to and circulating lines within your
dishwasher are protected. Failure to do
so could result in property damage.
NOTE
See Installation Instructions for more
details.
NOTE
If the dishwasher door is opened while
the unit is running, the START/CANCEL
button must be pressed and the door
shut immediately to return the unit
to the selected cycle and option. This
must happen within 10 minutes for the
unit to continue the cycle.
Loading ...
Loading ...
Loading ...